Compliance & Certificates
BAL Ratings
As of May 2010 The Australian Building Codes Board (ABCB) endorsed the final draft version of the Australian Standards 3959 – Building in Bushfire Prone Areas code, which is now referenced by the Building Code of Australia.
There is now a specified methodology for the determination of building’s construction requirements.These determining factors are:
- Whether the building is in a designated bushfire prone area.
- The bushfire attack level (BAL) of the building based upon the site classification.
- The selection of the appropriate construction solutions for the determined BAL rating.
The levels are based on radiant heat flux exposure and range from ‘Low’ to ‘Flame Zone’. These are now recognized as the six levels of bushfire attack.
Because of Australia’s ongoing history of bushfire prevalence many homes will come under periodic threat from serious bushfire danger. ACOL is mindful of this threat and for this reason we have released a range of roof windows and skylights which comply with the new ABCB code.
Splendid Skylight and Roof Window range can be fabricated to be DTS compliant with the BAL rating requirement of 29 or less. All Splendid Skylight and Roof Window exterior flashings are manufactured using the same material from which the roof in fabricated, being either .55mm Zincalume or .55mm Colorbond Steel.
In addition our window frames are made from powdercoated aluminium rather than timber.
The Skylight or Window can be glazed with 6mm toughened glass as a minimum. This ensures that all exterior componentry of the window is fabricated with 100% non-combustible material.
The exterior flashings are also fabricated with no open gaps or seams in the trays; making the window fully resistant to ember attack when correctly installed. (Installation must be performed using ‘Ember Guard’ to seal all openings and seams, as required with all roofing installations).
In addition to this, windows can be furnished with “Tough mesh” or stainless steel insect screens rather than traditional nylon screens, providing a material impervious to ember attack even when the windows are in open position.
Click here to see the Deemed-to-Satisfy (DTS) Provisions for Windows.Reference: A Guide to Windows & Doors in Bushfire Prone Areas, Australian Glass & Window AssociationSee more: HIA Bushfire Resources
Certificates
Splendid Skylights products comply with the updated Australian Standard AS4285-2019 and have been retested and recertified in 2026 at a Melbourne NATA certified testing facility, click below for relevant certificates.
The SolarLight Kits include an Input Control Unit with an onboard 240V driver. These devices have been tested by an accredited facility and have been certified to comply with the relevant parts of Australian Electrical Standard AS/NZS 4417.1:2000 As a result, they are approved to carry the “C-Tick – mark” which is the Australian RCM symbol for compliance and approval. The certificate below by Global-Mark provide you with the confidence these tests have been done properly.
